HEP Applications and Their Experience with the Use of DataGrid Middleware

An overview is presented of the characteristics of HEP computing and its mapping to the Grid paradigm. This is followed by a synopsis of the main experiences and lessons learned by HEP experiments in their use of DataGrid middleware using both the EDG application testbed and the LCG production service. Particular reference is made to experiment data challenges, and a forward look is given to necessary developments in the framework of the EGEE project.     

C-shaped slot loaded reconfigurable microstrip antenna

A new electronically reconfigurable dual frequency microstrip patch antenna with highly simplified varactor tuning circuitry is presented. The proposed design allows relatively independent selection of the two operating frequencies. Tuning ranges of 7.1 and 4.1% are realised for the two resonant frequencies without the use of any matching circuits.     

Melting behavior of blends of milk fat with hydrogenated coconut and cottonseed oils

The melting behavior of milk fat, hydrogenated coconut and cottonseed oils, and blends of these oils was examined by nuclear magnetic resonance (NMR) and differential scanning calorimetry (DSC). Solid fat profiles showed that the solid fat contents (SFC) of all blends were close to the weighted averages of the oil components at temperatures below 15°C. However, from 15 to 25°C, blends of milk fat with hydrogenated coconut oils exhibited SFC lower than those of the weighted averages of the oil components by up to 10% less solid fat. Also from 25 to 35°C, in blends of milk fat with hydrogenated cottonseed oils, the SFC were lower than the weighted averages of the original fats. DSC measurements gave higher SFC values than those by NMR. DSC analysis showed that the temperatures of crystallization peaks were lower than those of melting peaks for milk fat, hydrogenated coconut oil, and their blends, indicating that there was considerable hysteresis between the melting and cooling curves. The absence of strong eutectic effects in these blends suggested that blends of milk fat with these hydrogenated vegetable oils had compatible polymorphs in their solid phases. This allowed prediction of melting behavior of milk-fat blends with the above oils by simple arithmetic when the SFC of the individual oils and their interaction effects were considered.     

In vitro lipolysis of fish oil microcapsules containing protein and resistant starch

Microencapsulated fish oil powders (50% oil:25% protein:25% starch) were prepared using a physical blend or a heated mixture of sodium caseinate and pre-processed resistant starch as encapsulants. The in vitro digestibility of microcapsules by lipase, amylase and proteases were examined. Heat treatment of the encapsulants and exposure of microcapsules to simulated gastric fluid (SGF) prior to addition of lipase, trypsin and amylase altered the susceptibility of the microcapsules to digestion. Lipolysis of microcapsules occurred in the presence of lipase alone and was increased in the presence of amylase and/or trypsin. Pre-exposure of microcapsules to SGF had different effects on lipolysis, which depended on the nature of the encapsulant material. Lipolysis in the presence of lipase alone was due to the displacement of the interfacial layer. Increased lipolysis in the presence of amylase and/or trypsin was attributed to the digestion of the encapsulant, which facilitated displacement of the interface of oil droplets by bile salts.     

Modeling the powder compaction process using the finite element method and inverse optimization

This paper focuses on studying and adapting modeling techniques using the finite element method to simulate the rigid die compaction of metal powders. First, it presents the implementation of the cap constitutive model into ABAQUS FE software using the closest point projection algorithm. Then, an inverse modeling procedure was proposed to alleviate the problems raised by the interpretation of the experimental tests and to more accurately determine the material parameters. The objective function is formed, based on the discrepancy in density data between the numerical model prediction and the experiment. Minimization of the objective function with respect to the material parameters was performed using an in-house optimization software shell built on a modified Levenberg?CMarquardt method. Thus, an integrated simulation module consisting of an inverse optimization method and a finite element method was developed for modeling the powder compaction process as a whole. The simulation and identification module developed was applied to simulate the compaction of some industrial parts. The results reveal that the maximum absolute error between densities is 2.3%. It corresponds to the precision of the experimental method.     

Induction Time in Crystallization Fouling on Heat Transfer Surfaces

This work deals with the induction period in crystallization fouling on heat transfer surfaces. While the crystal growth period can be calculated, the influencing effects in the initial stage of crystallization fouling are not fully understood and quantified so far. To identify the factors influencing the induction time, experiments with calcium sulfate were performed on modified surfaces. As surface parameters the free surface energy, roughness and topography were determined by drop shape analysis and/or AFM. The visual information by microscopic studies with a SEM shows different behavior in the initial stage of crystallization on modified surfaces at constant process conditions. These microscopic findings could be verified with induction times of fouling experiments, leading to a prediction of the induction time based on surface parameters and supersaturation of the salt solution.     

Intestinal passage of microencapsulated fish oil in rats following oral administration

Fish oil labelled with [(14)C-linolenin] tracer was orally administered by gavage as an oil-water mixture (free oil) or as an oil-in-water emulsion formulation (microencapsulated oil) to fasted rats. Groups of rats were then given food after gavage or alternatively not fed to examine the effect of food on intestinal passage. Feeding after gavage drives lumenal free oil faster through the gastrointestinal (GI) tract. Microencapsulation slows down the lumenal progression in the GI tract with feeding. Non-feeding also slows down the lumenal progress of free oil in the GI tract but this is not influenced by microencapsulation. Analysis of the relative distribution of the label along the GI tract tissue wall showed that the upper small intestine was the main site of label accumulation in the GI tract. Of the oil that remained in the lumen, there was slight protection against early uptake and metabolism in the stomach and upper GI tract in rats that were either fed or not fed after dosing when microencapsulated oil was administered. Microencapsulation increased the levels of radiolabel in the liver and blood. The primary organ for accumulation of radiolabel for both free and microencapsulated oils in rats that were fed or fasted after dosing was the liver.     

Analysis of blood vessel maturation processes during cyclic ovarian angiogenesis

Cyclic angiogenic processes in the ovarian corpus luteum (CL) of monovulatory species are characterized by distinct phases of blood vessel growth, vessel maturation, and vessel regression. To characterize molecular and cellular systems that may play a role in regulating blood vessel maturation, we have (a) analyzed the spatiotemporal expression of vascular endothelial growth factor (VEGF) and its receptors VEGF-R1 (Flt-1) and VEGF-R2 (Flk-1) throughout the ovarian cycle, (b) examined the recruitment of pericytes during vessel maturation, and (c) quantitatively measured the ratio of angiopoietin-2 (Ang-2) to angiopoietin-1 (Ang-1) throughout the ovarian cycle. The data indicate that the VEGF/VEGF-receptor system is expressed not only during ovarian angiogenesis, but also with similar intensity in the nonangiogenic midstage CL. In fact, VEGF is expressed through most of the ovarian cycle, only being down-regulated during luteolysis, which leads to regression of the CL neovasculature. Pericytes are recruited soon after the induction of CL angiogenesis following the front of invading endothelial cells. Based on a double-staining immunohistochemistry technique, we developed a microvessel maturation index (MMI) that reflects the percentage of the capillary neovasculature that is associated with pericytes. The MMI in the angiogenic corpus rubrum is approximately 0.60. This value is not significantly higher in the nonangiogenic midstage CL but increases to close to 0.90 during CL regression. Lastly, an RT-PCR analysis of Ang-1 and Ang-2 expression revealed that both molecules are expressed throughout the ovarian cycle. The quantitative Ang-2/Ang-1 ratio does, however, change from 1.34 in the angiogenic CL and 1.07 in the midstage CL to 7.59 during CL regression, reflecting the strong overexpression of Ang-2 over Ang-1 during blood vessel regression. Taken together, the data support a model of a transiently maturated vasculature in the midstage CL, which is characterized by VEGF and pericyte contact-mediated endothelial cell survival and an induction of blood vessel regression during luteolysis that is characterized by the down-regulation of VEGF and the up-regulation of Ang-2.